Textile Industry


For Textile Finishing and Dyeing Businesses

Water, size, dye bath and surfactant tests for textile finishing and dyeing mills. Ensure high quality in production with color consistency, chemical residues and water quality analysis.

Textile finishing and dyeing businesses must manage critical stages such as water quality, correct use of chemical components and residue control during the softening, coloring and final processing of fabrics.

In this category, various test solutions are offered to control parameters such as pH balance of dye baths, hardness level, iron and copper ions, correct use of sizing agents and the absence of residues from surfactants. There are also test kits for factors that directly affect dyeing and finishing processes, such as water hardness, sulphate and phosphate levels.

With these test solutions, textile factories, dyehouses and chemical suppliers can maintain standard quality in production processes, ensure color consistency and optimize water and energy consumption.

For Textile Finishing and Dyeing Businesses
Total Hardness Test Kit 1D
It ensures proper color retention in dyeing processes by determining water quality.
Easily measure total water hardness. Check scale-related hardness and water softener performance. 1 drop = 1 °d. Approximately 50 tests....
Total Hardness Test Kit f
It ensures proper color retention in dyeing processes by determining water quality.
Easily measure total water hardness. Check scale-related hardness and water softener performance. 1 drop = 1 °f. Approximately 50 tests....
Total Hardness Test Kit 2,5 f
It ensures proper color retention in dyeing processes by determining water quality.
Easily measure total water hardness. Check scale-related hardness and water softener performance. 1 drop = 2.5 °f. Approximately 50 tests....
Total Hardness Test Kit Titrator Solution (1F)
It ensures proper color retention in dyeing processes by determining water quality.
Ready-to-use replacement titrant for 1 °f hardness tests. 1 drop = 1 °f. Available in 250 mL and 1000 mL with a free precision dropper....
Iron Test Kit – Fe (II+III)
Analyzes iron levels in dye baths to prevent unwanted color changes.
Easily check iron in water. Monitor rust-colored deposits, metal corrosion and residual iron after water treatment with simple color comparison....
Copper Test Kit – Cu²⁺
Detects the presence of excessive copper in water systems.
Easily check copper in water and process liquids. Monitor copper from metal corrosion, treatment residues and changes in water quality....
Nickel Test Kit – Water and Metal Surface Testing
Controls the effect of metals on the fabric surface during the dyeing process.
Easily check for nickel in buttons, jewelry, metal accessories and surfaces. Monitor nickel in water, metal parts and industrial processes....
Silica Test Kit
Analyzes the chemical composition of water in dyeing and finishing processes.
Easily measure silica in water. Monitor mineral deposits, water treatment performance and water quality in boiler and cooling systems....
Phosphate Test Kit
Prevents excessive accumulation of softening chemicals on the textile surface.
Easily measure phosphate in water. Monitor algae growth conditions, water treatment performance and phosphate changes in process water....
 Sulfate Test Kit (0-200ppm)
Determines the sulphate content of water in textile dyeing processes.
Easily measure sulfate in water and process liquids. Monitor mineral levels in drinking water, groundwater, water treatment and industrial systems....
Universal pH Indicator Solution (pH 4.0–10.0)
Provides pH control by measuring the pH value of the fibers.
Easily check pH in water, fabric extracts and liquids. Universal pH 4.0–10.0 color scale with 0.5 pH reference steps. Results in 2 minutes....
Sizing Kit (Starch/PVA/PVAc/CMC/Acrilate)
It helps to increase the efficiency of dyeing and finishing processes by determining the presence and concentration of sizing agents (starch, PVA, PVAc, CMC, acrylate) used on textile surfaces.
Identifies starch, PVA, PVAc, CMC and acrylate sizing structures to guide desizing, pretreatment and root-cause analysis of dyeing defects....
Formaldehyde Screening Kit - For Textiles
It verifies the suitability of textile products for human health by detecting formaldehyde residue in fabrics.
Formaldehyde Test Kit ensures health and safety by quickly and reliably detecting formaldehyde in the furniture, textile, construction and chemical sectors....
Anionic Surfactant Test Kit
It determines the amount of anionic active substance in textile chemicals.
Easily measure anionic active matter in detergents and textile chemicals. Check raw materials and production batches without laboratory delays....
Peroxide Stabilizer Structure Determination Test Kit
It helps to ensure optimum stabilization in bleaching and whitening processes by performing structural analysis of peroxide stabilizers used in the textile industry.
Determine the structure of peroxide stabilizers quickly and accurately. Can be used in cotton bleaching or whitening. Results in 5 minutes!...
Hydrogen Peroxide Residue Test Kit in Bleach
It is used to determine the amount of hydrogen peroxide remaining on the fabric surface after the bleaching process. It provides optimum results in dyeing and finishing processes.
Checks residual hydrogen peroxide after bleaching to support process efficiency, washing adequacy and safe transition to dyeing....
Sulfur Detection Test Kit in Viscose
Detection of sulfur residues on viscose fiber is a critical analysis to improve color stability and textile quality in dyeing and finishing processes.
Evaluates sulfur-related residue differences in raw viscose to support lot comparison, raw-material acceptance, pretreatment and dyeing decisions....
Dye House Test Pack
Contains comprehensive test kits to analyze the quality of water and chemicals used in dyeing processes.
Dyehouse Test Package provides fast and reliable analysis with special kits for testing water, cotton and chemicals in textile dyehouses. With discounted consultancy....
Hydrophilicity Test Solution
Analyzes the hydrophilicity properties of cotton, viscose, modal and polyester fabrics.
Visually evaluates fabric wetting and water-spreading behaviour to support pretreatment efficiency, absorbency and dyeing-readiness control....
Alkalinity Test Kit
It improves color consistency and process efficiency by optimizing the alkalinity level of water in dyeing and finishing processes.
Easily measure water alkalinity. Check pH buffering, water treatment and process conditions. 1 drop = 10 ppm, approximately 50 tests....
Bicarbonate Test Kit – For Soft Water
It increases the stability of chemical processes by controlling the bicarbonate level of water in dyeing and finishing processes.
Easily measure bicarbonate in soft and treated water. Monitor pH buffering with a simple drop test. 1 drop = 10 ppm HCO₃⁻. Approximately 50 tests....
Iron Binding Capacity Detection of the Ion-binders
It provides control by measuring the iron content of water in order to prevent the negative effects of iron ions in the dyeing process.
Determines Fe³⁺ binding capacity of sequestrants and chelating agents for textile chemical development, comparison and quality control....
Hypochlorite Residue Test Kit
It determines whether hypochlorite-based chemicals used in bleaching and whitening processes remain on the fabric and ensures that they do not damage the color fastness and strength of textile products.
Supports post-disinfection rinse verification by checking hypochlorite residue in rinse water from equipment and process lines....
Ammonium Test Kit
Ammonia, ammonium chloride etc. Detects the presence of ammonia in acrylate polymers produced with ammonia. Polyacrylates are used in textile dyeing as dispersants, thickeners, soaps, and ion sequestrants. Acrylates produced with ammonia easily decompose as alkalinity/temperature/pressure increases, releasing ammonia into the environment and causing precipitation. In the presence of ammonia, they can cause many problems such as pH drops, stains, etc. in dyeing.
Easily monitor ammonium in water. Track changes in wastewater treatment, fertilization and process water to better understand water quality....
Free (Active) Chlorine Test Kit
It measures the presence of active chlorine (HOCl) ions in water.
Easily measure free chlorine in water and disinfection processes. Monitor chlorination, disinfectant levels and water quality with simple testing....
Detection Kit for Copper Binding of Ion-Binders
Determines Cu²⁺ binding capacity of sequestrants and chelating agents for textile chemical development, comparison and quality control....
Colin Chemical Industry Inc.
We have been offering specific solutions for your scientific preferences for 26 years.

İkitelli OSB Mutsan Sanayi Sitesi M10 Blok No:3 Başakşehir İSTANBUL


© 2026 Colin Kimya San. ve Tic. A.Ş. All Rights Reserved. 216.73.216.104