Cationic Surfactant Test Kit

Cationic Surfactant Test Kit

Measure esterquat and cationic active matter by drop titration. Practical testing for fabric softeners, textile auxiliaries and raw material quality control.

  • Rapid result test format
  • Practical field-use analysis
  • Drop-count based measurement
  • High repeatability
Providing details like intended use, delivery location, packaging preference, and quantity will help us offer you faster and more accurate pricing.
Product Code: 248
Barcode: 8680131852482
Last update: 30 Ekim 2026 , Cuma

Testonic® Cationic Active Matter Test Kit is designed for quick and practical measurement of cationic active matter in fabric softeners, textile auxiliaries and products containing cationic surfactants. It is suitable for raw material inspection, production control and product development.

The test provides results in approximately 5 minutes without specialized analytical instruments. Its drop-count procedure uses a visual endpoint at which the blue colors of two phases become equal, allowing the active matter content of esterquats and other suitable cationic ingredients to be calculated.

Drop Factor
1 drop = 0.1280 mg Esterquat
Test Time
Approx. 5 minutes
Test Capacity
Approx. 50 tests

Why Measure Cationic Active Matter?

Cationic surfactants are important ingredients in fabric softeners and many textile auxiliaries. Monitoring active matter content makes it easier to evaluate raw materials, production formulations and consistency between manufacturing batches.

3 Easy Steps

  1. Prepare the sample: Transfer 1 mL of a suitably prepared sample into the measuring tube.
  2. Add the reagents: Apply Solutions A and B in the quantities specified in the instructions.
  3. Determine the result: Titrate with Solution C until the blue colors of the two phases become equal. Calculate active matter content from the drop count.

Who Uses It?

Fabric softener manufacturers, textile auxiliary producers, cationic surfactant suppliers, R&D teams and quality control laboratories.

Kit Contents

Test Solutions A, B and C, measuring tube and instructions for use.

Cationic Active Matter Test Kit – Esterquat and Cationic Surfactant Analysis

Testonic® Cationic Active Matter Test Kit is designed to determine cationic active matter content in fabric softeners, textile auxiliaries and products containing cationic surfactants. It provides convenient testing for raw material inspection, production control, formulation comparison and R&D applications.

The drop-count test is completed when the blue colors of two phases become equal. Results are available in approximately 5 minutes, and active matter content is calculated from the number of titrant drops used. No specialized analytical instrument is required.

Parameter
Cationic Active Matter
Drop Factor
0.1280 mg Esterquat
Test Time
5 minutes
Test Capacity
Approx. 50

Applications

  • Fabric softener manufacturing: Checking active matter content in esterquat-containing products.
  • Textile auxiliaries: Evaluating cationic softeners and other suitable cationic products.
  • Raw material inspection: Comparing cationic surfactants from different suppliers.
  • Production quality control: Monitoring active matter levels between manufacturing batches.
  • Formulation development: Comparing formulation changes and cationic ingredient content.
  • R&D: Rapid active matter checks on prepared samples.

How to Use

  1. Prepare the sample: Dissolve or dilute the product as specified in the instructions and adjust the sample to neutral pH.
  2. Fill the tube: Transfer 1 mL of the prepared sample into the measuring tube.
  3. Add Solution A: Add 1 mL of Solution A and shake.
  4. Add Solution B: Add 3 drops of Solution B, shake and wait for 3 minutes.
  5. Complete the titration: Add Solution C one drop at a time. Shake and wait 10 seconds after each drop. Stop when the blue colors of both phases become equal.
  6. Calculate the result: Use the Solution C drop count, the relevant ingredient-specific factor and any sample dilution.

Technical Specifications

Product Name Testonic® Cationic Active Matter Test Kit
Parameter Cationic surfactant content
Sample Volume 1 mL of prepared sample
Drop Factor 1 drop of Solution C = 0.1280 mg Esterquat equivalent
Endpoint Matching blue colors in the two phases
Sample Preparation Dissolved, homogeneous sample adjusted to neutral pH
Test Time Approximately 5 minutes
Test Capacity Approximately 50 tests
Equipment No specialized analytical instrument required

Understanding the Results

The number of Solution C drops used during titration is used to calculate the cationic active matter content. For esterquat, each drop corresponds to 0.1280 mg equivalent.

Ingredient-specific factors are used for CTAC, Stearalkonium Chloride, Distearyldimonium Chloride, Quaternium-27 and other suitable cationic ingredients listed in the instructions for use.

When calculating active matter content, the sample quantity and any dilution are taken into account. Concentrated raw materials and powdered products are tested after suitable dilution. Appropriate finished-product solutions containing 5–25 g/L of chemical may be tested without dilution under the conditions described in the instructions.

Kit Contents

  • Solution A
  • Solution B
  • Solution C – Titrant
  • Glass measuring tube
  • Instructions for use and ingredient-specific calculation factors

Related Testonic Tests

Cationic Surfactant Detection Test Kit Checking the cationic surfactant character of a sample.
Cationic Active Matter Test Kit Measuring cationic active matter in raw materials and formulations.
QAC / Cationic Detergent Residue Test Kit Checking QAC and cationic detergent residues after cleaning and disinfection.

Frequently Asked Questions

1. What does the Cationic Active Matter Test Kit measure? It is used to determine cationic active matter content in fabric softeners, cationic surfactant raw materials and suitable formulations.
2. How do I identify the endpoint? The test is complete when the blue colors of the two phases become equal during titration with Solution C. The drop count is then used for calculation.
3. What does 1 drop = 0.1280 mg Esterquat mean? Each drop of Solution C corresponds to 0.1280 mg esterquat equivalent under the specified test conditions. Sample quantity and any dilution are considered when calculating the final result.
4. Can the kit be used only for esterquat? No. Other suitable cationic ingredients listed in the instructions can be evaluated using their respective equivalence factors.
5. Can concentrated fabric softeners be tested? Yes. Concentrated and powdered products are dissolved and diluted as specified in the instructions.
6. Can I compare different production batches? Yes. Active matter levels can be compared when the same sample preparation and testing conditions are used.
7. How many tests can one kit perform? Approximately 50 tests, with results generally available in about 5 minutes.

For Chemical and Auxiliary Chemical Manufacturers

Measures the amount of cationic active substance in chemical products.

Test and Process Control Kits for Textile Finishing and Dyeing Mills

Monitors cationic surfactant/QAC residues, helping evaluate staining and incompatibility risks from softeners, fixatives, disinfectants or cationic chemical carryover.

Technical Documents

No technical document has been added for this product yet.
Related Posts

Related News

Technical Support and Product Consulting

You can use the form to find the most suitable chemical solution for your needs or to obtain detailed information about the technical specifications of our products.
Your requests are carefully reviewed and answered by Colin's expert team.

You can ask us about the product.

Colin Chemical Industry Inc.
We have been offering specific solutions for your scientific preferences for 26 years.

İkitelli OSB Mutsan Sanayi Sitesi M10 Blok No:3 Başakşehir İSTANBUL


© 2026 Colin Kimya San. ve Tic. A.Ş. All Rights Reserved. 216.73.216.104