Testonic® QAC Test Kit is designed for the rapid and practical determination of quaternary ammonium compound (QAC) concentrations in water and suitable process solutions. It is particularly useful for preparing QAC-based disinfectant solutions, controlling chemical dosage, and monitoring concentration during use.
The syringe-based titration method allows measurement without expensive laboratory instruments. Each ring on the measuring syringe corresponds to 10 ppm QAC. Results are available in approximately 5 minutes.
Why Is QAC Concentration Important?
Quaternary ammonium compounds are used in various cleaning and disinfection applications. Regular measurement of QAC concentration makes it easier to monitor the intended solution strength and control chemical dosage. This helps reduce the risk of using solutions that are too dilute or too concentrated.
QAC Measurement in 3 Easy Steps
- Prepare the Sample: Add the specified volume of liquid sample to the graduated test tube according to the instructions.
- Perform the Test: Add the test solutions in the specified sequence and perform the titration using the measuring syringe.
- Read the Result: Determine the number of syringe rings used at the endpoint color change. Under standard test conditions, each ring corresponds to 10 ppm QAC.
Kit Contents
- QAC Test Solutions (3 Bottles)
- Graduated Test Tube
- Special Measuring Syringe
- Instructions for Use
Testonic® QAC Test Kit is a titration kit designed for the rapid and easy determination of quaternary ammonium compound (QAC) concentrations in water and suitable process solutions. It is particularly useful for monitoring the dosage and concentration of QAC-based disinfectant working solutions.
The special measuring syringe provides numerical results without laboratory instruments. Each ring on the syringe corresponds to 10 ppm QAC. The test takes approximately 5 minutes, making it a practical option for field, operational, and quality control applications.
Why Is QAC Concentration Important?
Quaternary ammonium compounds are active ingredients used in various industrial cleaning and disinfection applications. Maintaining the intended concentration in working solutions is important for proper chemical dosing control.
Regular QAC measurement makes it easier to check newly prepared solutions, monitor concentration changes during use, and evaluate chemical consumption.
Applications
- Disinfectant Solutions: Preparation and concentration control of QAC-based products.
- Industrial Cleaning: Monitoring working baths containing quaternary ammonium compounds.
- Food Processing Facilities: Checking suitable QAC-containing cleaning and disinfection solutions.
- Hygiene Services: Routine concentration monitoring of prepared chemical solutions.
- Water and Process Applications: Analysis of suitable QAC-containing liquid samples.
- Quality Control: Monitoring chemical preparation and dosing processes.
QAC Measurement in 3 Easy Steps
- Prepare the Sample: Fill the graduated test tube with the liquid sample to the specified level according to the instructions for use.
- Perform the Titration: Add the test solutions in the sequence specified in the instructions. Continue the titration using the special measuring syringe.
- Determine the Result: Read the syringe rings used at the endpoint color change. Under standard test conditions, each ring corresponds to 10 ppm QAC.
Technical Specifications
| Product Name | Testonic® QAC Test Kit |
| Measured Parameter | Quaternary ammonium compounds (QAC) |
| Sample Type | Water and suitable liquid process / working solutions |
| Analytical Method | Titration using a measuring syringe |
| Measurement Factor | 1 ring = 10 ppm QAC |
| Result Unit | ppm (mg/L) QAC |
| Result Reading | Color change and syringe scale |
| Analysis Time | Approximately 5 minutes |
| Test Capacity | Approximately 50 tests |
| Storage Temperature | 8–24 °C |
| Equipment Required | No laboratory instruments required |
Interpretation of Results
QAC concentration is determined by reading the measuring syringe rings used to reach the titration endpoint. Under standard test conditions, the calculation is:
For example, if 8 rings are used during titration, the measured result is 80 ppm QAC.
The result can be compared with the intended working concentration of the disinfectant or process chemical to evaluate dosing.
What Is the QAC Test Used For?
- Checking the concentration of freshly prepared QAC solutions
- Monitoring chemical levels in working solutions
- Checking dosing and dilution procedures
- Comparing different preparation batches
- Maintaining routine process and quality control records
Related Residue and Hygiene Tests
- QAC / Cationic Detergent Residue Test Kit: Checking cationic chemical residues after cleaning and rinsing.
- Anionic Detergent Residue Test Kit: Monitoring anionic cleaning chemical residues.
- Nonionic Detergent Residue Test Kit: Monitoring nonionic detergent residues.
- Protein Residue Test Kit: Checking protein-related organic residues after cleaning.
- Acid / Alkali Residue Test Kit: Checking cleaning chemical residues.
Important Usage Notes
- Follow the product instructions for sample volume and reagent addition sequence.
- Use the special measuring syringe supplied with the kit.
- Apply the ring factor according to the standard test conditions.
- Compare the measured concentration with the recommended use level of the relevant chemical product.
Frequently Asked Questions
Test and Process Control Kits for Textile Finishing and Dyeing Mills
Monitors cationic surfactant/QAC residues, helping evaluate staining and incompatibility risks from softeners, fixatives, disinfectants or cationic chemical carryover.
Technical Documents
Related Posts
Related News
Technical Support and Product Consulting
You can use the form to find the most suitable chemical solution for your needs or to obtain detailed information about the technical specifications of our products.
Your requests are carefully reviewed and answered by Colin's expert team.
You can ask us about the product.