Copper Test Kit in Drinking Water

Copper Test Kit in Drinking Water

Easily check copper in drinking and tap water by color comparison. 0.1–3.0 mg/L range, results in about 5 minutes, approximately 90 tests.

  • Rapid result test format
  • Result via color change
Providing details like intended use, delivery location, packaging preference, and quantity will help us offer you faster and more accurate pricing.
Product Code: 256
Barcode: 8680131852567
Last update: 3 Kasım 2026 , Salı

Testonic® Copper Test Kit for Drinking Water is designed for easy measurement of copper (Cu) in drinking, tap and purified water. Check copper levels through a simple color comparison and monitor changes in your plumbing system and water quality.

A practical solution for home users and water purification systems. Simply fill the test tube with water, add a few drops of the test solution and read the result using the color scale printed on the package.

0.1–3.0 mg/L Copper measurement range
Results in 5 Minutes Easy color comparison
Approx. 90 Tests With 10 mL solution

Why Check Copper in Water?

Copper may enter drinking water from copper pipes and plumbing fittings. Regular testing helps you monitor changes in copper concentration over time.

3 Easy Steps

  1. Prepare the Sample: Fill the test tube to the middle mark (5 mL) with water.
  2. Add the Solution: Add 3 drops of the test solution, close the cap and shake.
  3. Read the Result: Wait 3 minutes and compare the developed color with the scale on the package.

Package Contents

  • Copper Test Solution – 10 mL
  • Test tube with 5 mL mark

Testonic® Copper Test Kit is a convenient color-comparison test for determining copper (Cu) concentration in water samples. It can be used to check drinking water, tap water, well water and purified water.

Copper may enter drinking water from pipes and plumbing fittings. Comparing water samples collected after standing and after flushing can be useful for monitoring changes related to the plumbing system.

No laboratory instrument is required. Simply add the test solution to a water sample and compare the developed color with the scale printed on the package to estimate copper concentration.

How to Perform the Copper Test

  1. Rinse the test tube with the water to be tested.
  2. Fill the tube to the middle mark with 5 mL of water.
  3. Add 3 drops of Copper Test Solution.
  4. Close the cap and shake gently.
  5. Wait 3 minutes.
  6. Compare the developed color with the scale on the package and read the result in mg/L (ppm).

Measurement Range and Color Interpretation

The kit covers a copper concentration range of 0.1–3.0 mg/L with six color levels:

0.1 / 0.2 / 0.4 / 0.8 / 1.5 / 3.0 mg/L

Match the developed color with the closest reference on the scale. Within the scale, a darker yellow indicates a higher copper concentration. Results are approximate values obtained by visual comparison.

A result lighter than the lowest color level does not necessarily mean that copper is absent. Samples outside the measurement range or between color levels may require a more precise analytical method.

Technical Specifications

Measured parameter Copper (Cu)
Measurement range 0.1–3.0 mg/L (ppm)
Color levels 6
Sample volume 5 mL
Solution dosage 3 drops
Color development time 3 minutes
Test capacity Approx. 90 tests / 10 mL
Storage temperature 8–24 °C

Package Contents

  • Copper Test Solution: 10 mL dropper bottle
  • Test Tube: Capped tube with 5 mL measurement mark

Important: Compare colors in a well-lit environment. Do not drink the test solution or tested water. This kit is intended for convenient copper monitoring; it does not independently establish whether water is safe to drink or verify all chemical and microbiological quality parameters.

Frequently Asked Questions

1. Can I test copper in tap water?
Yes. The kit is suitable for checking copper levels in tap water and drinking water.

2. Can I test water from a purification system?
Yes. Purified water can be tested and compared with untreated tap water.

3. What does a darker color mean?
Within the kit's yellow color scale, a darker color corresponds to a higher copper concentration.

4. Does no visible color mean there is no copper?
No. The copper concentration may be below the lowest measurement level of the kit.

5. When should I read the result?
Compare the sample with the color scale 3 minutes after adding the solution and mixing.

6. How many tests can I perform?
A 10 mL bottle provides approximately 90 tests.

7. Does the result confirm that water is safe to drink?
No. This test evaluates copper only. Drinking-water suitability depends on other relevant quality parameters as well.

Technical Documents

No technical document has been added for this product yet.
Related Posts

Related News

Technical Support and Product Consulting

You can use the form to find the most suitable chemical solution for your needs or to obtain detailed information about the technical specifications of our products.
Your requests are carefully reviewed and answered by Colin's expert team.

You can ask us about the product.

Colin Chemical Industry Inc.
We have been offering specific solutions for your scientific preferences for 26 years.

İkitelli OSB Mutsan Sanayi Sitesi M10 Blok No:3 Başakşehir İSTANBUL


© 2026 Colin Kimya San. ve Tic. A.Ş. All Rights Reserved. 216.73.216.104