Iron Test Kit in Drinking Water

Iron Test Kit in Drinking Water

Easily check iron in drinking and tap water. Monitor rust-colored water, deposits and filtration. 0.25–5 mg/L color scale, approximately 90 tests.

  • Rapid result test format
  • Result via color change
  • Suitable for water quality monitoring
Providing details like intended use, delivery location, packaging preference, and quantity will help us offer you faster and more accurate pricing.
Product Code: 257
Barcode: 8680131852574
Last update: 3 Kasım 2026 , Salı

Testonic® Iron Test Kit for Drinking Water is designed for easy measurement of iron (Fe II+III) in drinking, tap, well and purified water. Determine iron levels through a simple color comparison and monitor changes in water quality.

A practical solution for investigating iron-related discoloration, rust-colored deposits and plumbing stains. No laboratory instrument is required. Simply add a few drops of test solution and read the result using the color scale on the package.

0.25–5.0 mg/L Iron measurement range
Results in 5 Minutes Easy color comparison
Approx. 90 Tests With 10 mL solution

Why Check Iron in Water?

Iron is a common water quality parameter, particularly in well water and metal plumbing systems. Elevated iron levels may cause discoloration, deposits and rust-colored stains on surfaces.

3 Easy Steps

  1. Prepare the Sample: Fill the test tube to the middle mark (5 mL) with water.
  2. Add the Solution: Add 3 drops of Iron Test Solution and shake gently.
  3. Read the Result: Wait 3 minutes and compare the developed color with the scale on the package.

Package Contents

  • Iron Test Solution – 10 mL
  • Test tube with 5 mL mark

Testonic® Iron Test Kit is a convenient color-comparison test for checking iron (Fe II+III) levels in water samples. It can be used for drinking water, tap water, well water and water purification systems.

Iron is commonly encountered in groundwater and metal plumbing systems. Yellowish or brownish discoloration, deposits and rust-colored stains may be associated with iron in water. Regular testing allows users to monitor changes in iron concentration over time.

No laboratory instrument is required. Simply add the test solution to a water sample and compare the developed color with the scale printed on the package to estimate iron concentration.

How to Perform the Iron Test

  1. Rinse the test tube with the water to be tested.
  2. Fill the tube to the middle mark with 5 mL of water.
  3. Add 3 drops of Iron Test Solution.
  4. Shake the tube gently to mix.
  5. Wait 3 minutes.
  6. Compare the developed color with the scale on the package and read the result in mg/L (ppm).

Measurement Range and Color Interpretation

The kit covers an iron concentration range of 0.25–5.0 mg/L with six color levels:

0.25 / 0.5 / 0.75 / 1.0 / 2.5 / 5.0 mg/L

Match the developed color with the closest reference on the scale. Within the measurement range, a darker orange indicates a higher iron concentration.

Results are approximate values obtained by visual comparison. A result lighter than the lowest color level does not necessarily mean that iron is absent.

Technical Specifications

Measured parameter Iron – Fe (II+III)
Measurement range 0.25–5.0 mg/L (ppm)
Color levels 6
Sample volume 5 mL
Solution dosage 3 drops
Color development time 3 minutes
Test capacity Approx. 90 tests / 10 mL
Storage temperature 8–24 °C

Package Contents

  • Iron Test Solution: 10 mL dropper bottle
  • Test Tube: Tube with 5 mL measurement mark

Important: Compare colors in a well-lit environment. The sample's original color or turbidity may affect visual interpretation. Do not drink the test solution or tested water. This kit is intended for convenient iron monitoring and does not independently establish whether water is safe to drink.

Frequently Asked Questions

1. Can I test iron in tap water?
Yes. The kit can be used to check iron levels in tap water and drinking water.

2. Can I measure iron in well water?
Yes. It is suitable for monitoring iron levels in well water.

3. Does this kit measure Fe(II) and Fe(III)?
The product is designed for Fe(II+III) iron testing. Results are interpreted using the supplied color scale.

4. What does a darker orange color mean?
Within the measurement range, it indicates a higher iron concentration.

5. Does no visible color mean there is no iron?
No. The iron concentration may be below the lowest measurement level of the kit.

6. How many tests can I perform?
A 10 mL bottle provides approximately 90 tests.

7. What should I do if the test indicates a high iron level?
Repeat the test if necessary. The water source and plumbing system may be checked, and a more precise laboratory analysis can be performed when needed.

Test and Process Control Kits for Textile Finishing and Dyeing Mills

Monitors iron in water, bath or rinse samples to help identify sources of rust marks, yellowing, local stains and shade deviations.

Technical Documents

No technical document has been added for this product yet.
Related Posts

Related News

Technical Support and Product Consulting

You can use the form to find the most suitable chemical solution for your needs or to obtain detailed information about the technical specifications of our products.
Your requests are carefully reviewed and answered by Colin's expert team.

You can ask us about the product.

Colin Chemical Industry Inc.
We have been offering specific solutions for your scientific preferences for 26 years.

İkitelli OSB Mutsan Sanayi Sitesi M10 Blok No:3 Başakşehir İSTANBUL


© 2026 Colin Kimya San. ve Tic. A.Ş. All Rights Reserved. 216.73.216.104