Testonic® Calcium Test Kit is designed for easy measurement of calcium (Ca) in drinking, tap, well and process water. Monitor mineral content, calcium-related scale formation risks and changes in water treatment systems.
The simple drop-count titration method requires no laboratory instrument. Add the test solutions, observe the color change and count the titrant drops to calculate calcium concentration directly in ppm (mg/L).
Why Measure Calcium in Water?
Calcium is a natural mineral component of water and contributes to water hardness. It is an important parameter when evaluating scale formation in heating systems, plumbing and water-using equipment.
3 Easy Steps
- Prepare the Sample: Fill the test tube with the water volume specified in the instructions.
- Add the Solutions: Add the test solution and indicator in the specified order, then mix.
- Read the Result: Add the titrant drop by drop until the color change is complete. Multiply the number of drops by 4 to calculate calcium concentration in ppm (mg/L).
Package Contents
- Calcium Test Solution
- Calcium Indicator Solution
- Calcium Titrant Solution
- Graduated test tube
Testonic® Calcium Test Kit is a practical drop-count titration kit developed to determine calcium (Ca) concentration in water samples. It can be used for drinking water, tap water, well water, aquarium water and industrial process water.
Calcium is a natural mineral component of water and contributes to total hardness. Monitoring calcium levels is useful for evaluating scale formation risks, checking water treatment systems and observing changes in mineral content.
The kit uses a color-change titration method. Counting the titrant drops allows users to calculate calcium concentration directly. No specialized laboratory instrument is required.
How to Perform the Calcium Test
- Rinse the test tube with the water to be tested.
- Collect the sample volume specified in the instructions.
- Add the calcium test solution and indicator in the specified order and quantities.
- Mix the sample gently.
- Add the titrant drop by drop, mixing after each addition.
- When the specified color change is complete, count the titrant drops used.
How to Calculate the Result
1 titrant drop = 4 ppm (mg/L) Ca
Calcium (mg/L) = Number of titrant drops × 4
For example, if 10 drops of titrant are required, the calcium concentration is calculated as 40 mg/L Ca.
This conversion factor applies when the sample volume and procedure specified in the kit instructions are followed.
Calcium vs. Total Hardness
Calcium is one of the main minerals contributing to water hardness. However, total hardness is not determined by calcium alone; magnesium also contributes to total hardness.
Therefore, the Calcium Test Kit measures calcium concentration only. A separate Total Hardness Test Kit is required to measure the combined hardness contribution of calcium and magnesium.
Technical Specifications
| Measured parameter | Calcium (Ca) |
| Test method | Drop-count titration |
| Drop factor | 1 drop = 4 ppm (mg/L) Ca |
| Result unit | mg/L (ppm) Ca |
| Result time | Approximately 5 minutes |
| Test capacity | Approximately 50 tests |
| Number of test solutions | 3 |
| Storage temperature | 8–24 °C |
Package Contents
- Calcium Test Solution
- Calcium Indicator Solution
- Calcium Titrant Solution
- Graduated test tube
Important: Always use the specified sample volume and count only the titrant drops. Do not drink the test solutions or tested water. Actual test capacity may vary depending on calcium concentration and titrant consumption.
Frequently Asked Questions
1. What does the Calcium Test Kit measure?
It measures calcium (Ca) concentration in water samples in mg/L (ppm).
2. Can it be used for tap and drinking water?
Yes. The kit can be used to check calcium concentration in tap water, drinking water and well water.
3. How is calcium concentration calculated?
Count the titrant drops required to reach the color-change endpoint and multiply by 4. For example, 10 drops correspond to 40 mg/L Ca.
4. Does the calcium test also measure total hardness?
No. Magnesium is not measured by this test. A separate test is required for total hardness.
5. Can I test water from a purification system?
Yes. Calcium concentrations before and after water treatment can be compared.
6. What happens when calcium is high?
Calcium can contribute to scale formation under suitable conditions. The risk also depends on other water chemistry parameters and operating temperature.
7. How many tests can I perform?
The kit provides approximately 50 tests. The actual number may vary according to titrant consumption.
Test and Process Control Kits for Textile Finishing and Dyeing Mills
Monitors calcium in process water, helping evaluate hardness, precipitation, surfactant incompatibility and dye bath stability risks.
Technical Documents
Related Posts
Related News
Technical Support and Product Consulting
You can use the form to find the most suitable chemical solution for your needs or to obtain detailed information about the technical specifications of our products.
Your requests are carefully reviewed and answered by Colin's expert team.
You can ask us about the product.