Testonic® Concentrated SBF 5× – Two Component System (A+B)
Testonic® Concentrated SBF is a two-component concentrated solution system designed for the convenient preparation of Kokubo-type Simulated Body Fluid (SBF). A 2 L concentrate kit (1 L Component A + 1 L Component B) is designed to prepare 10 L of ready-to-use SBF.
Concentrated Simulated Body Fluid – Two-Component System for Convenient, Controlled and Economical SBF Preparation
Testonic® Concentrated SBF is developed to simplify the preparation of Simulated Body Fluid used in biomaterials research, hydroxyapatite formation studies and surface mineralization experiments.
By keeping calcium-containing and phosphate-containing ingredients in separate components, the system is designed to reduce the risk of unwanted calcium phosphate precipitation during storage. It also minimizes the need for individual weighing and preparation of multiple chemical reagents.
The concentrated format offers practical advantages in handling, transportation and laboratory storage compared with ready-to-use SBF solutions.
Applications
- In vitro bioactivity testing of biomaterials
- Hydroxyapatite formation and surface mineralization studies
- Evaluation of bioactive glasses, ceramics and composite materials
- Implant surface and calcium phosphate coating research
- Research laboratories requiring frequent preparation of large volumes of SBF
- Experimental studies requiring reproducible simulated physiological ionic environments
How Does the Two-Component System Work?
Testonic® Concentrated SBF consists of two separately packaged concentrated solutions containing the mineral salts and buffering ingredients required for preparing Kokubo-type SBF.
- Component A – Acidic Mineral Concentrate: Contains sources of sodium, potassium, magnesium, calcium, chloride and sulfate ions.
- Component B – Phosphate and Buffer Concentrate: Contains phosphate, bicarbonate and TRIS buffering ingredients.
Separating calcium and phosphate during storage is intended to minimize premature mineral precipitation. The components are combined with purified water at the specified ratio to prepare the target SBF solution.
Formulation and Technical Specifications
| Parameter | Specification |
|---|---|
| Product type | Two-component concentrated SBF preparation system |
| Reference formulation | Kokubo-type Simulated Body Fluid |
| Concentration factor | 5× based on the total concentrate volume |
| Number of components | Two (A+B) |
| Component A | Acidic mineral concentrate |
| Component B | Phosphate, bicarbonate and TRIS buffer concentrate |
| Preparation ratio | 1 part Component A + 1 part Component B; dilute with purified water to a final volume of 10 parts |
| Target final pH | 7.40 ± 0.05 at 36.5–37 °C |
| Buffer system | TRIS / HCl |
| Target ionic composition | Na⁺, K⁺, Mg²⁺, Ca²⁺, Cl⁻, HCO₃⁻, phosphate and SO₄²⁻ |
| Appearance | Clear, colorless solutions |
| Intended use | Biomaterials and laboratory research |
Packaging Options and Preparation Capacity
| Packaging | Kit Contents | Target SBF Yield |
|---|---|---|
| 1 L Kit | 1 L Component A + 1 L Component B | 10 L |
Important: The preparation capacities are based on the specified volumetric dosing system and are subject to final formulation validation.
Instructions for Use
Preparation of 1 L of 1× SBF:
| 100 mL Component A |
100 mL Component B |
1,000 mL Final 1× SBF |
Combine the specified volumes of Components A and B with purified water and adjust the final solution volume to 1,000 mL. The approximate water requirement is 800 mL, but the final volume must be measured rather than calculated by simple volume addition.
- Add approximately 700 mL of purified or deionized water to a clean laboratory vessel.
- Add 100 mL of Component B and mix until homogeneous.
- Slowly add 100 mL of Component A under continuous stirring.
- Bring the solution to 36.5–37 °C.
- Make up to a final volume of 1,000 mL with purified water.
- Check the clarity and pH of the prepared solution.
Target final pH: 7.40 ± 0.05 at 36.5–37 °C.
The system is being developed to allow SBF preparation without additional acid or base adjustment by the end user. This performance characteristic remains subject to validation.
Product Advantages
- Two-component formulation: Keeps calcium and phosphate ingredients separate during storage.
- Convenient preparation: Reduces individual reagent weighing and solution preparation steps.
- Space-saving concentrate: Offers reduced transportation and storage volume compared with ready-to-use SBF.
- Controlled composition: Designed to achieve the target ionic profile of Kokubo-type SBF.
- Flexible preparation: Suitable for laboratories preparing different volumes of SBF.
- Efficient laboratory workflow: Supports routine biomaterials and mineralization studies.
Storage Conditions
- Store both components in their original, tightly closed containers.
- Protect from direct sunlight and contamination.
- Do not use solutions showing visible precipitation, cloudiness or crystallization.
- Recommended storage temperature and shelf life will be established following stability validation.
Why Choose Testonic® Concentrated SBF?
- Two-component system designed for Kokubo-type SBF preparation
- Separate storage of calcium and phosphate ingredients
- Convenient dilution and reduced reagent handling
- 2 L concentrate kit designed to prepare 10 L of SBF
- Practical solution for biomaterials and surface mineralization research
Technical Documents
Related Posts
Related News
Technical Support and Product Consulting
You can use the form to find the most suitable chemical solution for your needs or to obtain detailed information about the technical specifications of our products.
Your requests are carefully reviewed and answered by Colin's expert team.
You can ask us about the product.